The thermal imaging camera converts the infrared signal into an electronic signal for displaying the image on the monitor screen, after calculating the temperature difference between the objects. Using the thermal camera, you can identify the problem quickly and accurately.

thermal-imaging-cameraIf you find the problem in the early stage like poor electrical connection or any leakage, then you can save your time, effort and production losses.

Thermal Imaging Camera

This type of devices allows us to see the objects in the dark place based upon the temperature of the environment.

The image produced in the thermal camera screen is the digital representation of the scene and it is due to the thermal radiations emitted from the objects. You can use the thermal camera easily and they are available at affordable prices.

In this article, you can get more details about how to use thermal imaging cameras.


In the industries, this device is used to identify the hot-spots which lead to the cause of any damages.

Most of the time, the thermal cameras are fixed to the motor control center or electrical cabinets for scanning the areas in order to detect the problem in the early stage. Now, the thermal cameras are available in different shapes and sizes for installing it and for the various types of industries.  


It is very difficult to find the insulation losses from the buildings and the thermal imaging device detects the problem quickly. It also identifies the exact location of the leakage, electrical faults, and moisture. With the thermal imaging tools, you can correct the problem before it becomes more serious.

Thermal Inspection for Buildings:

It is important to do the thermal inspect regularly in the important areas and here you can get more ideas for starting the process.

1) Define the Task

First, analyze the condition of the present condition of the building and then determine the temperature difference both inside and outside. Make sure the place is safe for starting the inspections.

2) Start from the Outside

Start the procedure from outside the building and you can identify any damages easily. If the condition is normal in that area, then take some thermal images for the future references and you can also compare it with the picture which shows the defects.

3) Continue Inside

Once you checked outside, just follow the same steps for detecting faults inside the building. But you have to remove the object like furniture and drape from that place before starting the inspection process.

Try to remove those things before six hours because the thermal property affects the readings. Then start scanning each room of the building using the thermal camera and note the details about the location where you take the image.

4) Set up an Air Tightness Test

Take details clearly even it contains small damages or cracks because it may create many problems and so it is important to take airtightness test. Fix the BlowerDoor for blowing the air in or out of the building by creating the small pressure and using this method, you can identify the holes quickly.

5) Analysis and Reporting

After the inspection, you have to analyze the image which is saved in your thermal imaging cameras and create a report according to that.

Law Enforcement

The police officers use thermal cameras for identifying the location of the suspects and they can spot the hiding person even during the night time.

Moreover, they can check the interior walls to find the money or drugs and to collect the required evidence.  The fireman uses helmet-mounted or hand-held thermal cameras for detecting the hot spot at the time of emergency situations.  

Bottom Line

Hope you got a clear idea about the thermal imaging cameras after reading the above article. Try to get the best thermal camera for you with more interesting features for detecting and avoiding the problems in your buildings or industries.

Having any queries? Please feel free to ping us through the comment section below.